Decorative High-Pressure Laminate (HPL Sheets)

Yantai MONCO Board Co.,Ltd is one of the most reliable decorative high-pressure laminate (hpl sheets) manufacturers and suppliers in China, welcome to get decorative high-pressure laminate (hpl sheets) made in China from us and check the quotation with us.Basic InfoModel NO.: 8001-Size: 1220*2440;1330*3050,1220*3660 or Other SizeSurface: Matte,Glossy,Texture or OthersTrademark: MaiteSpecification: 1, 220 x 2, 440mmHS Code: 3921909090Color: Xd-2503Thickness: 0.4-25.0mmLocation: Qingdao,ChinaPackage: Refer to The BuyerOrigin: Qingdao ChinaProduct DescriptionAbout   UsWe are a professional manufacturer of high pressure laminates (HPL). with more than 15 years experience.Generally we have three types of HPL:single side decorative HPL,post forming HPL,double side compact HPL.Profile:1.Choose substrte glue and tooles with high quantity. The substrates usually available in the market  include blockboard,MDF,particleboard.ect. pay attention to the moisture contentAnd the smoothness of the substrates when choosing. Be sure the substrates are well sanded. The glue used should be good quality and with good adhesive strength. Whensutting the laminate, please use carbon steel tool and make all cuts from side color paper.2.Evenly spread the glue on backside of the laminate and the surface of the substrate. If the surface is rugged and heavily water,absorbing, a second of glue is probably needed.3,  Let the glue spread the glue on backside. Notice:volatilizing time differs according to season,weather and geographic area,please take practical experoence&working condition Into account and refet to the indication on the package of glue.4,Carefully adhere the laminate onto the substrate. Notice:any air between laminate and substrate should be driven out using rolling or rag while pressing the laminate to the wubstrate. Make sure the glue is well distributed and there is no any air between laminate and substrate.5.Trim the side and clean.Applicable limitedecorative high pressure laminate1, Used for indoor only, not suitable for adh ring cement,concrete wall and gypsum wallboard directly.2, Non-structural materil should be adhered to suitable basis materil.3, Non suitable to lay down at the place with temperature over as 135ºC and insolation at sunshine directly. Size   SizeNotes :1220*2440mm4*8 ftStandard sizes for all types of HPL , colors and finishes1220*1830mm4*6 ftAvailable for matte , texture, glossy finishes1310*2440mm4.3*8 ftOnly available for texture and glossy finishes1510*2440mm5*8 ftOnly available for texture finish1530*1830mm5*6ftOnly available for texture finishEnterprise Quality StandardTEST ITEMStandard stipulation by Q/320412 Ymm 001~2005Wear resistance305 cyclesBoiling water resistanceSurface:weight≤12%,thickness increase ≤12%Cigarette buming eesistanceLevel  2 and aboveCleanabilityLevel  3 and aboveDry heat resistanceLevel  3 and aboveTension resistanceMpa≥30Surface standardRefer tointernational  salable productSOME WORDS TO YOUHopefully our brief introductions about products have helped you better understanding us. Please confirm with us more information listed above the products and the order quantity. If you need more specific information about products, please feel free to contact us.Waiting for your early reply, and sincerely we hope to cooperate with you in the nearest future.